Kingston HyperX 8GB (2x4GB) DDR3 1600MHz CL9 SODIMM- Laptop Memory

IMAG0174[ad#ad-1]Kingston’s H1600C9S3P1k2/8G is a 4GB kit of DDR3- 1600 CL 9 SDRAM,  with total Kit capacity of 8GB. Each module kit has been tested to run DDR3- 1600 at a low latency timing of 9-9-9 at 1.5V.  The module come with a heat spreader. The memory module is capable of clocking its memory speeds down if need me. This will be done automatically by your system. In the video below we showcase the Kingston HyperX 8GB DDR3 1600MHz CL9 SODIMM memory module and showcase a simple install process. enjoy.

PnP JEDEC TIMING PARAMETERS:
• DDR3-1600 CL9-9-9 @1.5V
• DDR3-1333 CL8-8-8 @1.5V
• DDR3-1066 CL6-6-6 @1.5V

FEATURES
• JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
• Posted CAS
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• Programmable CAS Write Latency(CWL) = 8 (DDR3-1600)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double  sided  component

IMAG0172IMAG0173IMAG0171


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *